MS 26
Lorem ipsum dolor sit amet consectetur adipisicing elit.
Sound Management MS 26 is a digital audio loudspeaker management system with 2 inputs and 6 outputs, USB interface and a provision for 2 remote volume controls. Ports (0-10VDC).
Key Features
- 2 inputs x 6 outputs audio processor
- All inputs and outputs are balanced
- Control and mute buttons on the front panel
- Polarity in each input and output
- 4 parametric EQ filters per input
- 8 parametric EQ filters per output
Applications
- Live sound, stage monitoring, permanent installation
- Stereo, bi/tri-amped general applications
Technical Specification
| MODEL | MS 26 |
|---|---|
| INPUT | |
| Sensitivity | 0dBV |
| Input Impedance | >20k; electronically balanced |
| CMRR | >55dB (20Hz ÷ 20kHz) |
| Input Connectors | XLR female |
| Input Delay/ step | 1seg/20, 8μs |
| OUTPUT | |
| Nominal Output Level | 0dBV |
| Output Impedance | 300 ohm balanced |
| Output Connectors A/D &D/A | XLR3 male 24 Bit/48kHz |
| Frequency Response | 10Hz to ~20kHz |
| Output Noise Floor (FFT) | < -115dB (From 20Hz to 20kHz) |
| THD + Noise | <0.0028% (1kHZ, 1Vrms) |
| Crosstalk | >95dB, 40Hz ÷20KHz |
| Output Delay/ step | 1seg/20, 8μs |
| PARAMETRIC EQ | |
| Input | 4 per Channel |
| Output | 8 per Channel |
| Type | Q - 03 to 200 |
| Low and high shelf 6/12dB/oct | |
| Low and high pass 6/12dB/oct | |
| All pass 1 or 2 | |
| FILTER | |
| Input | 6, 12, 18, 24 or 48dB /Octave (Filter Type Dependant) |
| Output | Linkwitz-Riley, Butterworth or Bessel |
| Type | -60dB +12dB step 0.1 dB |
| COMPRESSOR LIMITER | |
| Threshold | -36 /+12dBV |
| Attack Time | 0.1 to 500ms |
| Release Time | 1 to 5s |
| Ratio | 1:1 to ∞ :1 |
| MAINS | |
| Voltage | 90÷264VAC 50/60 Hz |
| Power Consumption | 25VA |
| PACKING | |
| Dimensions (W X HX D) | 484 x 44 x 122 mm |
| Weight | 1.8 Kg |
About Series
Downloads
Perfectly Paired: Unlock the Ultimate Audio Experience
Note: This section is not dynamic and can be dymanic after finalizing the design.
Contrabass Series | CR 10s | Sub Woofer
The CR10s is designed for crystal-clear audio reproduction. When paired with the ST3, it enriches the soundstage with impeccable clarity and precision, making it ideal for venues where every note matters.
Contrabass Series | CR 210s | Sub Woofer
Integrating the CR210 with the ST3 creates a full-spectrum sound system that excels in delivering a rich and enveloping low frequency extension, providing a solid foundation for the ST3’s detailed acoustic output, ideal for both indoor and outdoor spaces
